2UZ-FE EMISSION CONTROL: CANISTER: INSTALLATION (2008 Sequoia)

Last Modified: 11-29-2007		1.6 A
Service Category: Engine/Hybrid System	Section: Emission Control
Model Year: 2008	Model: Sequoia	Doc ID: RM000002HXP00KX
Title: 2UZ-FE EMISSION CONTROL: CANISTER: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL CHARCOAL CANISTER OUTLET HOSE

(a) Install the charcoal canister outlet hose.

2. INSTALL NO.1 CHARCOAL CANISTER OUTLET HOSE

(a) Install the No. 1 charcoal canister outlet hose.

3. INSTALL CHARCOAL CANISTER SUPPORT BRACKET

(a) Install charcoal canister support bracket with the 2 bolts.

Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

4. INSTALL CHARCOAL CANISTER BASE BRACKET

(a) Install charcoal canister base bracket with the 2 bolts.

Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

(b) Install the hose clamp.

(d) Install the charcoal canister filter sub-assembly.

(e) Connect the No. 2 canister outlet hose sub-assembly.

NOTICE:

Check for damage or foreign objects on the connected part.
After connecting, check that the vent hose and the valve are securely connected by pulling on them.

5. INSTALL FUEL TANK VENT HOSE SUB-ASSEMBLY

(a) Connect the fuel tank vent hose sub-assembly.

NOTICE:

Check for damage or foreign objects on the connected part.
After connecting, check that the vent hose and the valve are securely connected by pulling on them.

6. INSTALL CHARCOAL CANISTER ASSEMBLY

(a) Install the charcoal canister assembly with the 3 bolts.

Torque: 29 N·m (296 kgf·cm, 21 ft·lbf)

(b) Connect the connector.

7. CONNECT NO.1 CHARCOAL CANISTER OUTLET HOSE

(a) Connect the No. 1 charcoal canister outlet hose.

8. CONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY

(a) Install the bolt.

Torque: 29 N·m (296 kgf·cm, 21 ft·lbf)

(b) Connect the vent line hose.

HINT:

Before installing the hose, make sure that it is not damaged. Make sure that there is no foreign matter present on the connecting surfaces.
After connecting, check if the hose and the connector are securely connected by pulling on them.